| Specifications | |
|---|---|
| Input Power | Single phase 110 VAC or 208-240 VAC (selectable at Product Options), 50 / 60 Hz 600 W power |
| Vacuum (not included) | Vacuum range: -95 ~ 0 kPa adjustable |
| Sealing Die | - Max battery size: ≤ 160 mm in length and width, ≤ 12 mm in thickness - Sealing width: 5 mm (customizable) - Sealing length: ≤ 190 mm - Sealing evenness: ≤ 0.03 mm overlapping precision of top and bottom sealing dies - Sealing die type: Sealing blade with rubber buffer (soft sealing) |
| Sealing Pressure | - Pressue range: 0 ~ 7 kg/cm² adjustable. Vacuum chamber lid and sealing die need to be driven by compressed high purity inert gasses with recommended 60 psi pressure. - Consumption: ~ 0.1 L compressed air per sealing - Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box. - Please note the air compressor is not included and not recommended to use in the glove box. Attention: If a gas cylinder is used instead of air compressor, a two-stage pressure regulator must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator. |
| Sealing Temperature | - Two independent digital temperature controllers are built in. - Temperature range: 50 ~ 300 ℃ adjustable with control accuracy of +/- 2 ℃ - Recommended temperature: 200 ℃ for top sealing die, and 160 ℃ for bottom sealing die |
| Sealing Time | 0 ~ 99 seconds adjustable (3 ~ 4 seconds recommended) |
| Size | - Dimension for 220V version: 408 mm L x 365 mm W x 480 mm H - Dimension for 110V version: 340 mm L x 380 mm W x 580 mm H - The compact 115A is suitable for working under glove box environment while with plenty space for other materials and equipment. |
| Net Weight | 50 kg |
| Glove Box Compatibility | - A KF40 Feedthrough with all necessary wire and tube is included to allow operating inside the glove box. - NO. 1 Vacuum Release - NO. 2 Gas Inlet Port (Tube size is 8), for all pneumatic component such as Die and Lid cover, must use Inert gas when operating in the glove box.(Gas Inlet Pressure ~116 psi) - NO. 3 Gas Outlet Port - NO. 4 Vacuum Port for Connecting the vacuum pump ( ~11.5mm OD, Barbed fitting to KF-25 Adapter is included TO connect to pump). Attention: High purity inert gasses are required for the operation of the machine. |
| Warranty | One Year limited warranty with lifetime support |
